Subject to change without notice. Haltec Corporation is not responsible for inadvertent typographical errors or omissions.
No return goods will be accepted unless authorized in writing by Haltec Corporation. All return goods must be shipped prepaid to the factory, and are subject to a restocking charge. Special items are not returnable.
No minimum order is required.
Haltec Corporation, Salem, Ohio, warrants its tire valves and tire valve hardware to be free from defects in workmanship and materials for a period of 60 days from date of shipment from plant. Haltec will replace any item found to be defective, or, at its option, will refund the purchase price of such item, provided that notice of the defect is given by the buyer within 60 days from date of shipment. The foregoing warranty is in lieu of all other warranties, expressed or implied.
Tire and Rim Servicing can be dangerous, and should be done by trained personnel using proper tools and procedures. The Occupational Safety and Health Administration has a safety standard for the servicing of single-piece and multi-piece rim wheels (OSHA std 29 CFR 1910.177) to include requirements for the safe servicing of rims used on passenger, truck, trailers, buses and off-road vehicle equipment.
All tire servicing should be performed by persons trained properly. Haltec has copies of this safety standard available upon request. Ask for the standard entitled "Servicing Single-Piece and Multi-Piece Rim Wheels." Failure to comply with these procedures as well as procedures recommended by Tire Manufacturers and Wheel and Rim Manufacturers may result in faulty positioning of the tire and rim and cause the assembly to burst with explosive force sufficient to cause serious physical injury or death. Haltec has developed a list of recommendations relating to the use of our products.